Application:
This Aluminum PCB separator with the automatic width adjustment function and depaneling the LED aluminum PCB board by 6 cutting wheel. The depaneling process with the low stress .suit for cutting LED aluminum PCB panel,LED copper substrate, LED light-emitting tube,display panel, LED T8 tube etc. if your PCB board with the PCB edge or your PCB board has different PCB width, choose this aluminum PCB separator can automatic to changeover the cutting width.it can quickly cutting the PCB panel to save more production time and avoid the tedious manual width adjustment.
Features:
* there are Group A, B and C for the PCB depaneling machine, The whole cutting process is divided into 3 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth after cutting.
* because of many times of cutting, the cutting process is very stable, greatly improving the positioning ability of the V-CUT slot. Even if the V-CUT slot is very shallow, there will be no V-CUT slot jumping out of the guide knife, avoiding the bad.
* Unique bar design, can quickly separating the edge of the LED board, for the development of LED aluminum substrate, also suitable for other long strip substrates.
* As the low cutting force of the blade for the aluminum PCB separator , it can prolong the working life of the blades and reduce the cost.
* This PCB separator can separate the LED panel with the component and won’t bend and twist after cutting.
* The platform can be filled with troughs to facilitate the storage of the divided substrates. The platform is optional for1.2 meters and 2.4 meters.
About this aluminum PCB separator how to easy to cut different PCB stripes width,
pleae check the project for " PCB depaneling machine and double pcb width auto changeover cutting " you will amazed for that.
